Three-way copper core internal thread plug valve X14T
Other Products
I. Introduction:
The plug of the X14T three-way copper inner thread plug valve can be cylindrical or conical. In a cylindrical plug, the passage is generally rectangular; while in a conical plug, the passage is trapezoidal. These shapes make the structure of the plug valve lightweight, but also cause a certain amount of loss. Plug valves are most suitable for cutting off and connecting media as well as diverting, but sometimes can also be used for throttling depending on the nature of the application and the erosion resistance of the sealing surface. Since the movement between the sealing surfaces of the plug valve has a wiping effect, and when fully open, it can completely prevent contact with the flowing medium, it is usually also suitable for media with suspended particles. Another important feature of the X14T three-way copper inner thread plug valve is that it is easy to adapt to multi-channel structures, so that one valve can have two, three, or even four different flow passages. This can simplify the design of the piping system, reduce the number of valves used, and eliminate some connecting fittings required in the equipment.
II. Product Features:
The opening and closing part of the plug valve is a cylinder with a hole, which rotates around the axis perpendicular to the passage together with the valve stem, so as to achieve the purpose of opening and closing the passage. It is mainly used for opening and closing the medium in pipelines and equipment. Its main advantages are as follows: Suitable for frequent operation, with small fluid resistance. Quick and easy to open and close. Relatively small volume, simple structure, light weight, and easy to maintain. Good sealing performance, not limited by installation direction, and the medium can flow in any direction. No vibration, low noise.
III. Part Materials:
Part Name |
Valve Body |
Plug |
Gland |
Packing |
X14T-1.0 |
Cast Iron |
Cast Copper |
Cast Iron |
Oil-soaked Asbestos Packing |
IV. External Dimensions:
Nominal Diameter |
Pipe Thread |
Dimensions (mm) |
|||
H |
L |
h |
□S |
||
15 |
1/2 |
117 |
85 |
30 |
12 |
20 |
3/4 |
126 |
90 |
34 |
16 |
25 |
1 |
160 |
110 |
42 |
18 |
32 |
1 1/4 |
176 |
130 |
48 |
18 |
40 |
1 1/2 |
210 |
150 |
64 |
26 |
50 |
2 |
238 |
170 |
76 |
28 |
65 |
2 1/2 |
250 |
220 |
80 |
30 |
80 |
3 |
340 |
250 |
115 |
38 |
100 |
4 |
350 |
300 |
125 |
42 |
V. Structural Diagram:
| Industry Category | Machinery & Equipment/Valves/Plug Valves |
|---|---|
| Product Category | |
| Brand: | 上海舟腾 |
| Spec: | X14T |
| Stock: | 99 |
| Manufacturer: | 上海舟腾泵阀制造有限公司 |
| Origin: | 113120 |
